Product Description
Plasma Cutting Machines CNC Table with Plasma Power for Metal Steel Plate SS MS CHINAMFG
I.Advantages:
1. The desktop plasma cutting machine is welded by square tube, Bilateral drive, and has good stability.
2. The machine is packaged as a whole when shipped ,save installation time.
3. Optional water tank or fan to reduce smoke and dust.
4. Suitable for plasma thin plate cutting, the cutting thickness is from 0.5mm-20mm.
5. Install a plasma automatic height controller. During the machine cutting process, the cutting gun can automatically rise and fall according to the unevenness of the steel plate to prevent the cutting gun from crashing, extend the life of the cutting gun, and save costs.
6. The control system has a graphic display function, which can observe the cutting process in real time. And supports 9 languages, it is easier to use your own native language to operate. With power-off memory function, you can continue cutting after the call, saving time for cutting from the beginning. There are 48 kinds of graphics, regular graphics can be directly called, change the size, set the number, save the computer drawing time and improve efficiency.
7. Using CHINAMFG brand stepper motor driver, stable operation and low noise.
8. Equipped with plasma anti-collision holder, when the CHINAMFG hits the steel plate, it will automatically stop to prevent the CHINAMFG from crashing and save costs.
8. Equipped with fully automatic nesting software, which saves time for typesetting and improves the utilization rate of steel plates.
9. Optional: remote control, the control distance is 30 meters, the operation is more convenient.
9. Optional: flame cutting function
10. It can be equipped with various power plasma power sources, such as 100A, 130A, 200A, etc., to achieve plasma cutting. The plasma cutting speed is 3-5 times that of flame cutting, which improves production efficiency.
II.Parameters:
| 1 | Cutting Shape | Steel plate with any plane shapes fromed by straight lines and arcs. | |||||||||||
| 2 | LCD Display Dimension | 10.4″Inches | |||||||||||
| 3 | Effective Cutting Size | 1500*3000mm | |||||||||||
| 4 | Plasma Cutting Thickness | 0.5-20mm (according to plasma power) | |||||||||||
| 5 | Height Control | Electric Height Control+Arc Voltage Height Control(THC) | |||||||||||
| 6 | Motor and driver | Stepper motor and driver | |||||||||||
| 7 | Cutting Speed | 0-8000mm per minute | |||||||||||
| 8 | Drive Mode | Double driver | |||||||||||
| 9 | Cutting Mode | Plasma | |||||||||||
| 10 | Ignition Device | Auto | |||||||||||
| 11 | File Transmission | USB | |||||||||||
| 12 | Cutting Gas | Plasma :air | |||||||||||
| 13 | Cutting Accuracy | ±0.5mm | |||||||||||
| 14 | Software | Professional Nesting Software(support Auto CAD/ Solidworks/ CAXA/ Types etc.) | |||||||||||
| 15 | Power Supply Voltage/Frequency | 220V/110V 50HZ 60HZ | |||||||||||
| 16 | Rated Power Supply | 1500W | |||||||||||
| 17 | Working Temperature | -10ºC-60ºC. Relative Humidity from 0-95% | |||||||||||
III.Professional Nesting Software:
1. Automatic drawing function, eliminating the need for independent CAD software
2. Comes with 61 kinds of libraries to save drawing time
3. Automatic nesting function, saving nesting time
4. Common edge cutting function, saving material and cutting time.
5. Bridge cutting function, save the number and time of perforation, and extend the service life of the nozzles.
IV. Cutting Samples:
V.Hot Sale Plasma Power Model and Quality Cutting Thickness
According your cutting thickness ,please choos suitable plasma model for you.
VI.Why Choose US?
1. More than 10 years of production experience to ensure product quality and timely delivery.
2. The perfect after-sales service team can solve all kinds of problems in time. You can communicate via email, phone, , , , etc.
3. We are a manufacturer, have enough spare parts and consumables, and deliver them in time to solve your worries.
4.Provide OEM/ODM Service.
VII.Certificates
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Customized: | Customized |
|---|---|
| Cutting Material: | Carbon Steel, Iron, Aluminum, Metal Alloy, Stainless Steel |
| Automatic Grade: | Automatic |
| Samples: |
US$ 5699/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Can I find aluminum tables with different finishes and surface treatments?
Yes, you can find aluminum tables with different finishes and surface treatments. Here is a detailed explanation:
1. Powder Coating: Powder coating is a common surface treatment for aluminum tables. It involves applying a dry powder to the aluminum surface and then baking it in an oven to create a durable and attractive finish. Powder coating provides a wide range of color options, textures, and finishes, including matte, glossy, or textured surfaces. This treatment enhances the appearance of the table, adds a layer of protection against scratches and corrosion, and can be customized to match various design preferences.
2. Anodizing: Anodizing is another popular surface treatment for aluminum tables. It is an electrochemical process that forms a protective oxide layer on the surface of the aluminum. Anodized aluminum tables have increased corrosion resistance and can be found in different colors, such as silver, bronze, black, or gold. The anodized finish also provides a smooth and sleek appearance while maintaining the natural metallic look of aluminum.
3. Brushed or Satin Finish: Some aluminum tables feature a brushed or satin finish. This finish is achieved by brushing the aluminum surface with abrasive pads or brushes in a unidirectional pattern. The result is a textured and slightly matte appearance that can help mask scratches or fingerprints. Brushed or satin finishes give aluminum tables a contemporary and modern look.
4. Polished Finish: Polished aluminum tables have a highly reflective and mirror-like appearance. This finish is achieved through a polishing process that involves buffing the aluminum surface using abrasive compounds. Polished aluminum tables can add a touch of elegance and sophistication to various settings.
5. Textured or Embossed Surfaces: Some aluminum tables may feature textured or embossed surfaces. These surface treatments create patterns or designs on the aluminum, adding visual interest and a unique aesthetic. Textured or embossed surfaces can range from subtle patterns to more intricate designs, allowing for customization and personalization of the table’s appearance.
6. Woodgrain or Faux Wood Finishes: For those who desire the look of wood but prefer the durability and lightweight nature of aluminum, there are aluminum tables available with woodgrain or faux wood finishes. These finishes mimic the appearance of different wood species, such as oak, teak, or walnut, while retaining the benefits of aluminum, such as weather resistance and low maintenance requirements.
7. Custom Finishes: In addition to the standard finishes mentioned above, some manufacturers offer custom finishes for aluminum tables. This allows customers to choose specific colors, patterns, or textures to match their unique preferences or design requirements. Custom finishes can be particularly useful for commercial settings, events, or projects with specific branding or design considerations.
When looking for aluminum tables with different finishes and surface treatments, it is advisable to check with furniture retailers, outdoor living stores, or manufacturers specializing in aluminum furniture. They can provide a wide range of options to suit various styles, preferences, and functional needs.
In summary, aluminum tables can be found with different finishes and surface treatments, such as powder coating, anodizing, brushed or satin finishes, polished finishes, textured or embossed surfaces, woodgrain or faux wood finishes, and even custom finishes. These options allow for customization and the ability to find an aluminum table that matches your desired aesthetic and design requirements.
Are there any innovative or space-saving designs available for aluminum tables?
Yes, there are innovative and space-saving designs available for aluminum tables. Here is a detailed explanation:
1. Folding Tables: Folding aluminum tables are a popular choice for those looking to save space. These tables feature collapsible legs or a hinged top that allows them to be easily folded and stored when not in use. Folding tables are compact and can be conveniently stored in small spaces such as closets, garages, or under beds. They are especially useful for outdoor gatherings, picnics, or camping trips where portability and space efficiency are important.
2. Expandable or Extendable Tables: Some aluminum tables come with innovative mechanisms that allow them to expand or extend their surface area. These tables typically have additional leaves or sections that can be inserted or unfolded to increase the table’s size. By incorporating these expandable features, the table can accommodate more people or provide a larger surface area when needed. When not in use, the additional leaves or sections can be removed or folded back, saving space.
3. Nesting Tables: Nesting tables are a clever space-saving solution that consists of multiple tables of different sizes that can be neatly stacked together. Aluminum nesting tables typically feature a set of two or more tables that can be arranged in various configurations. When not in use, the smaller tables can be nested under the larger ones, occupying minimal space. These tables offer versatility, allowing you to use them individually or as a set, depending on your needs.
4. Convertible Tables: Convertible aluminum tables are designed to serve multiple purposes, maximizing functionality while saving space. These tables can be transformed or adjusted to different configurations or forms to accommodate various activities. For example, some convertible tables can convert from a coffee table height to a dining table height, or from a regular table to a bar table. These versatile designs allow you to optimize space while adapting the table to different functions.
5. Built-in Storage: Some innovative aluminum table designs incorporate built-in storage compartments or shelves. These tables provide a dual-purpose solution by offering a functional tabletop surface and additional storage space. The storage compartments can be used to store items such as outdoor accessories, tableware, or even cushions. By integrating storage into the table design, you can reduce clutter and keep your outdoor space organized.
6. Modular Tables: Modular aluminum tables consist of individual components or modules that can be combined or rearranged to create different table configurations. These tables often feature interchangeable parts, allowing you to customize the table size, shape, or layout according to your specific needs. Modular tables are flexible and adaptable, making them suitable for various outdoor spaces and accommodating different seating arrangements.
7. Space-Saving Designs: In addition to specific features, many aluminum table designs focus on space efficiency as a whole. Tables with sleek and slim profiles, minimalist designs, or cleverly integrated features can help save space in outdoor areas. These designs prioritize functionality while reducing the overall footprint of the table, making them suitable for smaller balconies, patios, or decks.
When searching for innovative or space-saving aluminum tables, consider exploring different furniture brands, designers, or retailers that specialize in smart and compact designs. Read product descriptions, customer reviews, and examine images or diagrams to understand the specific features and space-saving capabilities of the tables.
By opting for these innovative and space-saving designs, you can enjoy the functionality and convenience of aluminum tables while maximizing the use of your outdoor space.
Are there specific types of aluminum alloys used in manufacturing tables?
Yes, specific types of aluminum alloys are commonly used in the manufacturing of tables. Here is a detailed explanation:
1. Aluminum 6061: Aluminum alloy 6061 is one of the most popular choices for manufacturing tables. It is a versatile alloy that offers a good balance of strength, durability, and workability. Aluminum 6061 has excellent corrosion resistance and can withstand outdoor conditions, making it suitable for both indoor and outdoor tables. This alloy is often used in the construction of lightweight and sturdy tables, including dining tables, outdoor patio tables, and folding tables.
2. Aluminum 5052: Aluminum alloy 5052 is another commonly used alloy in table manufacturing. It is known for its high strength and excellent corrosion resistance. Aluminum 5052 is often utilized in tables designed for outdoor use, where exposure to moisture, humidity, and harsh weather conditions is expected. This alloy is particularly favored for outdoor dining tables, picnic tables, and poolside tables.
3. Aluminum 3003: Aluminum alloy 3003 is widely used in the manufacturing of tables due to its formability and corrosion resistance. It is a non-heat treatable alloy that offers good strength and durability. Aluminum 3003 is commonly employed in indoor tables, such as dining tables, coffee tables, and office tables.
4. Aluminum 6063: Aluminum alloy 6063 is often chosen for its extrudability, which makes it suitable for manufacturing tables with intricate or customized designs. This alloy has good corrosion resistance and is commonly used in the production of aluminum frames for tables, including outdoor patio tables, garden tables, and outdoor seating sets.
5. Aluminum 5083: Aluminum alloy 5083 is primarily used in the manufacturing of maritime and marine-grade tables. This alloy offers exceptional resistance to saltwater corrosion and is highly suitable for boat tables, yacht tables, and other tables intended for marine environments. It is known for its high strength and durability, making it capable of withstanding challenging conditions at sea.
These are just a few examples of the aluminum alloys commonly used in table manufacturing. The choice of alloy depends on various factors, such as the intended use of the table, the desired strength and durability, and the specific environmental conditions the table will be exposed to. Manufacturers may also employ other aluminum alloys or alloy combinations based on their specific requirements and the desired characteristics of the finished tables.
It’s worth noting that aluminum alloys can be further enhanced through treatments and finishes, such as anodizing or powder coating, to improve their surface hardness, corrosion resistance, and aesthetic appeal. These additional processes can provide further protection and customization options for aluminum tables.
editor by CX 2024-01-22
China factory Engineering Specific Diesel Driven Portable Screw Air Compressor for Drilling Machines air compressor lowes
Product Description
Product Description
Kaishan KSCY-550/13 Diesel Portable Screw Air Compressor
Features of Diesel Portable Screw Air Compressor:
1.Low operating sound and less vibration design.Easy serviceability.
2.Low fuel consumption to realize far distance outdoor usage; Full protection system, energy saving.
3.High efficient Airend:
Large diameter rotor, airend connect with diesel engine through coupling and no reduction gear inside, more reliability, the
rotate speed is the same as the diesel engine’s, longer lifespan.
4.Good adaptability:
The Portable Air Compressor automatically control the air delivery of diesel engine by matching the demand of air consumption,
which equals frequency conversion control in motor power screw air compressor.
Specific performance is as follows:
1.Air filtration system: High efficient air inlet filter to prevent motor and airend rotors damaged by dirt particles
2.High efficient airend: Large rotors design and large bearings are used to ensure low RPM. This ensured low operating sound minimal vibration and extended operating life
3.Modulation Control: Based on air demand, the modulation valve will control the inlet air capacity and diesel engine RPM to minimize fuel consumption. Its features maximum energy saving.
4.Control panel: easy to control; high water temperature alarm, high-pressure alarm, high discharge air temperature alarm, and high
RPM alarms are all part of its features.
5.Cooler: Larger cooler and fan design to ensure maximum cooling especially for the extreme operating environment.
Product Parameters
| KSCY-550/13 Diesel Driven portable Screw Air Compressor | |
| Air compressor | |
| Model No: | KSCY-550/13 |
| Air capacity(m³/min/cfm) | 15 (530) |
| Work pressure(Bar/Psig) | 13 (190) |
| Fluid capacity(L) | 48 |
| Compression Stage | Single |
| Diesel Engine | |
| Engine Model No. | Cummins6BT5.9-C180 |
| Cylinder bore stroke number of cylinders | 102*120*6 |
| Capacity (L) | 5.9 |
| Rated RPM (r/min) | 1800 |
| Unload RPM(r/min) | 1400 |
| Rated Power (KW/hp) | 132(180) |
| Fuel Capacity(L) | 150 |
| Package | |
| Noise level db (a) | 80±3 |
| Outlet connection | G2*1,G¾*1 |
| Wheel size * Qty | 6.5-16×4 |
| Dimension/mm | 3450*1520*2220 |
| Weight(KG) | 2750 |
After Sales Service
1,24/7 service by chat online and phone.
2,Lifelong and free technical support.
3,Service overseas: if you need, we can dispatch an engineer to your door.
Company Profile
ZheJiang Rancheng Machinery Co.,LTD is 1 professional supplier drilling rigs in China ,we
are dedicated in designing and manufacture water well drilling rigs ,rotary drilling rig ,anchor drilling rig ,DTH drilling rig ,solar pile driver,mud pump ,air compressor and drilling tools etc,we have advanced technology ,Modern equipment, first-class team and rich experience ,our products passed ISO9001 ,CE etc certificated ,they are exported to around 200 countries and areas in the world ,get very good feedbacks from our clients.
We pursue the principle of “Customer First, Integrity First”, we are sincerely expecting to cooperate with you!!!
FAQ
1.Why choose us ?
Rancheng Machinery is a very professional drilling rig supplier in China. We have rich experience in this industry for 11 years.Now our products are serving around the world.we have High Quality, Competitive Price, and Fast Shipment.
2.Do you offer any custom designs?
Yes,we have our own trade factory. We provide services to top range partners.Produce a superior product for you by your designs.
3,How to make sure the quality we sent to you is same with what we said?
We are the Golded supplier on Alibaba, order through the alibaba trade assurance, will ganrantee the safe of your money and the quality of the goods.
4.How To Order ?
Step 1, please tell us what model and quantity you need;
Step 2, then we will make a PI for you to confirm the order details;
Step 3, when we confirmed everything, can arrange the payment;
Step 4, finally we deliver the goods within the stipulated time.
5. When will make delivery ?
About 10-15 work days after receipt of the payment.
6.After-sales Service
1 year warranty for all kinds of products;
If you find any defective accessories first time, we will give you the new parts for free to replace in the next order, as an experienced manufacturer, you can rest assured of the quality and after-sales service.
| After-sales Service: | Provide |
|---|---|
| Warranty: | 1 Year |
| Cooling System: | Air Cooling |
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
Are there special considerations for air compressor installations in remote areas?
Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:
1. Power Source:
Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.
2. Environmental Conditions:
Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.
3. Accessibility and Transport:
Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.
4. Maintenance and Service:
In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.
5. Fuel and Lubricants:
For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.
6. Noise and Environmental Impact:
Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.
7. Communication and Remote Monitoring:
Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.
By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.
.webp)
What are the environmental considerations when using air compressors?
When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:
Energy Efficiency:
Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.
Air Leakage:
Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.
Noise Pollution:
Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.
Emissions:
While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.
Proper Waste Management:
Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.
Sustainable Practices:
Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.
By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.
.webp)
What is the impact of tank size on air compressor performance?
The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:
1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.
2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.
3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.
4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.
5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.
It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.
Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.
editor by CX 2023-10-23